Silicone Hose, 2 3/8 x 2 inch ID Straight Reducer Color:Blue Be sure to slide the

Be sure to slide the hose far enough that you can position one of the large hose clamps above the clip slot

The 4-ply reinforcement results in a 5mm wall thickness (67mm / 2 5/8" and 61mm / 2 3/8" OD) and a working pressure rating over 18 psi (92 psi burst pressure)

This is the size recommended for our 3" (76mm) ID silicone hose when used with our HJ76 hose joiner

hose clamps sold separately

The 22mm ID at one end and 19mm ID at the other end let you connect a 7/8" OD tube to a 3/4" OD tube

Silicone Hose, 2 3/8 x 2 inch ID Straight Reducer Color:Blue Be sure to slide theOur silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). The outside has a smooth, shiny, "wipe down" finish that is easy to keep clean. These straight reducer hoses are approximately 5 inches long