Pay in 4 interest-free payments of $11.25 Learn more
Ships within 48 hours · Estimated delivery Aug 16 - Aug 21
The 4-ply reinforcement results in a working pressure rating in excess of 26 psi and a 5
50 and 3613-4
These special Tees measure approximately 4 inches long on the run with a 1" ID branch measuring approximately 1
securing with one small hose clamp
The 3-ply reinforcement results in a 4mm wall thickness (43mm / 1 11/16" and 33mm / 1 1/4" OD) and a working pressure rating over 27 psi (135 psi burst pressure)
Silicone Hose, 2" I.D. 135 degree Elbow, 4" Legs RE9019 The 4-ply reinforcement results inOur silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). These 135 degree elbows have a 2" ID with a smooth, shiny "wipe down" finish. The legs measure at least 4 inches long (measured from the
US$ 16.50
US$ 13.00
US$ 16.50
US$ 16.50
US$ 19750.00
US$ 24750.00
US$ 88.00
US$ 16.50
US$ 13.00
US$ 16.50
US$ 16.50
US$ 16.50
US$ 13.00
