Silicone Hose, 1 7/8" I.D. 90 degree Elbow Color:Red You must measure the OD

You must measure the OD of your hose AFTER it is installed on the tubing

The 5mm wall thickness results in a 4 7/8" (124mm) OD at one end and 4

Silicone rubber with 3-ply reinforcement makes this hose tough

These hump connector hoses have a 32mm ID to provide a flexible coupling between two 1 1/4" OD tubes

The 4-ply reinforcement results in a 5mm wall thickness (93mm / 3 5/8" and 80mm / 3 1/8" OD) and a working pressure rating over 20 psi (100 psi burst pressure)

Silicone Hose, 1 7/8" I.D. 90 degree Elbow Color:Red You must measure the ODOur silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). These 90 degree elbows have a 1 7 8" ID with a smooth, shiny "wipe down" finish. The 3 ply reinforcement results in a working pressure rating