Silicone Hose, 1 3/4" I.D. 45 degree Elbow Color:Red These 90 degree reducer elbow

These 90 degree reducer elbow hoses have a 63mm ID at one end and a 51mm ID at the other end to connect a 2 1/2" OD tube to a 2" OD tube

The 4-ply reinforcement results in a 5mm wall thickness (73mm / 2 7/8" and 67mm / 2 5/8" OD) and a working pressure rating over 18 psi (92 psi burst pressure)

These 45 degree reducer elbow hoses have a 35mm ID at one end and a 32mm ID at the other end to connect a 1 3/8" OD tube to a 1 1/4" OD tube

The 2-ply construction also withstands higher pressure and vacuum than our Single-Ply Silicone Air Duct Hose

HJ102 and HJ63) and Lined Hose Clamps (Part No

Silicone Hose, 1 3/4" I.D. 45 degree Elbow Color:Red These 90 degree reducer elbowOur silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). These 45 degree elbows have a 1 3 4" ID with a smooth, shiny "wipe down" finish. The 3 ply reinforcement results in a working pressure rating