41mm (1 5/8 inch) Pro Design Aluminum Hose Joiner Inch_3 1/4 OD: 69mm (2

OD: 69mm (2

The 4-ply reinforcement results in a 5mm wall thickness (61mm / 2 3/8" OD) and a working pressure rating over 21 psi (106 psi burst pressure)

The 4-ply reinforcement results in a 5mm wall thickness (86mm / 3 3/8" and 67mm / 2 5/8" OD) and a working pressure rating over 18 psi (92 psi burst pressure)

2" * Pressure and vacuum ratings are all for straight lengths of hose at 72° F

Works with OEM molded rubber hoses or any brand of silicone hose

41mm (1 5/8 inch) Pro Design Aluminum Hose Joiner Inch_3 1/4 OD: 69mm (2These anodized aluminum joiner nipples are designed for splicing together our 41mm (1 5 8") ID silicone coolant or turbo intake hose. Use them to connect any two 41mm ID hoses: an elbow to a straight section, a straight section to a reducer, or two elbows. To install, simply slip one hose over one end of the nipple until it just touches the centering bead. Slip the second hose over the other end until the two hoses meet in the middle. Add hose clamps