Photoelectric Tripwire Sensor 20m PR18S-TM20DPO - Emitter Receiver Pair Window Door Sensor 0Vp-p 75 ohm BNC output

0Vp-p 75 ohm BNC output Negative/ positive Negative/ positive optional Display Mode LED monitor/CRT monitor IR image optimize Anti exposure of the object in the middle Day/ Night Switch Auto/Color/B&W/Outside control (position start and end controllable) OSD Chinese/ English Menu Image adjust Yes 10%-90% Effective Pixel 768(H) X 494(V) Synchronization Internal S/N Ratio >60dB(AGC OFF) Auto Gain Control off/low/mid/high optional Motion Detection (MD) On/Off (multi-level sensitivity) Shading Area 8 Power 9-12V DC (3s Lipo battery) Edge light compensation Yes Synchronize IR turn on and color turn to B&W Yes optional DNR 2DNR Day/ Night time switch 2-63 Switchable time White dot repair Yes Function Control OSD Dimensions 36mm x 36mm (with case) / 32mm x 32mm Operation Temp

the newly converted temperature data is placed in this register

It also has the possibility to monitor battery voltage and current

you will be able to know their location and help instantly

Output fault detection Interface GPIO

Photoelectric Tripwire Sensor 20m PR18S-TM20DPO - Emitter Receiver Pair Window Door Sensor 0Vp-p 75 ohm BNC outputPhotoelectric Tripwire Sensor 20m PR18S TM20DPO Emitter Receiver Pair The Lanbao PR18S TM20DPO uses the most reliable and accurate style of photoelectric sensing which is the through beam sensor. The sensor comes with a pair of an emitter and a receiver. The emitter provides a constant invisible IR (infrared) beam of light to the receiver and detection occurs when an object passing between the two breaks the beam. The photodetection range of the PR18S