38mm (1 1/2 inch) Pro Design Aluminum Hose Joiner SR28.22-BLACK Be sure to slide the

Be sure to slide the hose far enough that you can position one of the large hose clamps above the clip slot

The 5mm wall thickness results in a 4 7/8" (124mm) OD at one end and 4

These 45 degree reducer elbow hoses have a 25mm ID at one end and a 16mm ID at the other end to connect a 1" OD tube to a 5/8" OD tube

but it can also be used to protect fittings in storage

HJ25) and 1 3/4" ID Lined Hose Clamps (Part No

38mm (1 1/2 inch) Pro Design Aluminum Hose Joiner SR28.22-BLACK Be sure to slide theThese anodized aluminum joiner nipples are designed for splicing together our 38mm (1 1 2") ID silicone coolant or turbo intake hose. Use them to connect any two 38mm ID hoses: an elbow to a straight section, a straight section to a reducer, or two elbows. To install, simply slip one hose over one end of the nipple until it just touches the centering bead. Slip the second hose over the other end until the two hoses meet in the middle. Add hose clamps