3/8" ID Air Hose 1/4" MPT Ends for Motorguard M30 M45 HIGH PRESSURE These injectors have columnar-style springs

These injectors have columnar-style springs and require two of the part number 1966 repair kit which has the ceramic ball

especially suitable when using corrosive chemical

0 rotating nozzle 5000 psi

We have answered technical calls in the middle of the night in which the only problem found was a piece of Teflon tape lodged next to diaphragm disallowing a seal

Angular contact ball bearings stabilizes the crankshaft and one thrust needle bearing absorbs the plunger load and assure long radial plate life

3/8" ID Air Hose 1/4" MPT Ends for Motorguard M30 M45 HIGH PRESSURE These injectors have columnar-style springs3 8" ID Air hose with 1 4" MPT ends for the Motorguard M30 M45. This will allow you to install your 1 4" Motorguard M30 or M45 desiccant filter into the outlet of your regulator set to max 80 psi. Straight end and elbow end. Hose is 12" to 24" in length and included in the kits. SKU: HA06 18