076: HS-200-HV (Shipment 15th of August 2026) 1x (040) PL sensor cable

1x (040) PL sensor cable / L = 150mm

1x (063) Power-Cube / 12

3V output cable / 1x C-M-6p + 3x JR / L = 200mm

2x 26cm Red/Black shrinking tube

1x 024: PL 4-14S HYB-BEC / 2x 5

076: HS-200-HV (Shipment 15th of August 2026) 1x (040) PL sensor cable200A Current measurement sensor board, based on Allegro Hall Sensor ACS 250U. The voltage reading of the LiPo is optimized for up to 14S LiPo packs. This Sensor board needs a power supply. So please select the matching BEC according to your preference from the BEC section. The BEC will also power the flight controller as well as the attached equipment like GPS, telemetry etc. Connected to the sensor are 2x10cm AWG10 wire (red) as a standard. The board