CAN Switch Board V3 Fahrzeughersteller_Subaru variable reluctance or opticalBoost control

variable reluctance or opticalBoost control referenced to gear

This ECU works for manual transmissions only

speed or throttle position512 mega bytes data logging memoryStaged injectionKnock with "windowing"The following expansion connector inputs/outputs are provided: XS connector 1 Gnd                Sensor Ground Only  +5V Out          Low Current +5V Supply DI 8               Digital Input DI 9               Digital Input An Volt 8        Analog 0-5V input An Volt 9        Analog 0-5V input Ign 7                Ignition 7 Auxiliary Output Ign 8                Ignition 8 Auxiliary Output Expansion connector 2  Gnd                Sensor Ground Only  +5V Out        Low Current +5V Supply DI 5                Digital Input DI 7                Digital Input An Volt 5        Analog 0-5V input An Volt 6        Analog 0-5V input An Temp 2        Temperature sensor input An Temp 3        Temperature sensor input

An Volt 4        Analog 0-5V input An Volt 5        Analog 0-5V input An Volt 6        Analog 0-5V input An ignition expansion is provided allowing you to convert to a Direct Spark ignition system

Suitable applications:

CAN Switch Board V3 Fahrzeughersteller_Subaru variable reluctance or opticalBoost controlKey features CAN BUS 2. 0B 500 or 1000kbps, user selectable different CAN ID and CAN frame structures can be selected, only 25x25mm in size, 8 switch inputs (switched to ground) 8 analog inputs rotary switch inputs, 0 5V, 10bits 4 low side outputs (0. 5A, resistive and inductive loads) 6 22V power supply +5V output for powering rotary switches, sensors and potentiometers firmware upgrade over the CAN bus